Radial Engineering J33 Manual de usuario descargar pdf (Pagina 4)

direct boxes

79

Visit fullcompass.com today!

For expert advice - call: 800-356-5844

M-F: 9:00-5:30 Central

SWITCHCRAFT DIRECT BOXES These boxes convert the output of high imped-

ance line level audio devices and musical instruments to low impedance, balanced

and isolated mic level signals that can be connected to audio consoles, mic pres,

effects processors, and other equipment with 3-pin XLR inputs. The SC700 and

SC700CT feature RCA inputs and are designed for use with sources like MP3 players

and turntables. The SC800 and SC800CT are designed for use with instruments. The

SC900 and SC900CT are also for instrument use and feature Phantom Lift technology

which allows the ground lift function to be operated remotely using +48V phantom

power from the console. All models feature throughputs, high quality I/O jacks, -20dB

pad, and Pin 1 ground lift. Built by hand in the USA.

ITEM DESCRIPTION PRICE

SC700 �� A/V direct box w/Jensen transformer �� 182�25

SC700CT �� A/V direct box w/custom transformer �� 114�75

SC800 �� Instrument DI box w/Jensen transformer �� 182�25

SC800CT �� Instrument DI box w/custom transformer �� 114�75

SC900 �� Instrument DI box, Jensen transformer, phantom lift �� 225�45

SC900CT �� Instrument DI box, w/custom transformer, phantom lift �� 155�25

SC800

SC700 SC800CT

SC900

ROLLS DB25 MATCHBOX The DB25 is a

transformer-balanced, passive direct box. It

features a ground lift switch for hum elimina-

tion, and an attenuator switch for padding the

input signal by 20dB, or 40dB. Padding the input signal provides a way to connect the

DB25 to a line-level signal, even a speaker level signal and connecting it to a balanced

line or mic input on a mixer. The two 1/4" inputs are paralleled for guitarists to “pass-

through” their input signal to a tuner, pre amp, etc.

ITEM DESCRIPTION PRICE

DB25-B �� Matchbox, polarity + pin 2 hot (XLR),

freqency response 50Hz-15kHz ±3dB �� 23�63

KLARK TEKNIK DN100 ACTIVE DIRECT BOX This features a high impedance,

transformer isolated input, XLR plus twin 1/4" jack input connectors, and a low

impedance active balanced XLR output. It utilizes 48V phantom power, has a switch-

able 30dB input pad & switchable 15dB output attenuation.

ITEM DESCRIPTION PRICE

DN100 �� Active direct box �� 99�00

DBX DB12 & DB10 DIRECT BOXES

Utilizes custom metal-shielded audio

transformers, high-quality Neutrik con-

nectors, and low-noise circuitry to preserve the sonic

integrity and true characteristics of the signal source. Both

boxes include a pad switch that accommodates instru-

ment, line and even speaker level signals. Includes polarity invert and ground lift.

ITEM DESCRIPTION PRICE

DB12 �� Active DI box �� 99�95

DB10 �� Passive DI box �� 79�95

DB12

LITTLE LABS RED EYE PASSIVE DIRECT BOX/RE-AMP BOX A direct box

and re-amping tool featuring a high-quality buffered direct box input (phantom

power required via XLR in) or passive direct box inputs; both with ground lift and

phase reverse capabilities. Compare the direct and re-amped signals with a single

button. It is expandable for daisy chaining to other Red Eyes to feed multiple amps

or pedals. (2) 1/4" instrument inputs (1 active, 1 passive), XLR in, XLR out and (1)

1/4" re-amp output.

ITEM DESCRIPTION PRICE

RED-EYE-3D ��Passive direct box/re-amp box w/ phantom power �� 269�00

PEAVEY ADI-C & ADI-Q ACTIVE DIRECT

INTERFACES Both direct interface units feature

an active 1/4" unbalanced high-impedance input,

local amplifier output, balanced XLR mic level out-

put, 1/4" unbalanced thru output, ground lift switch,

source select switch (pre/post processing) and

requires phantom power or an optional external 15VDC.

ITEM DESCRIPTION PRICE

ADI-C ��DI with compressor – soft-knee compressor, soft-knee noise gate �� 51�29

ADI-Q ��DI with EQ – bass control (shelving), mid sweep EQ control,

high EQ control �� 51�29

3004300��Power supply, 15V DC �� 13�66

PRO CO CB-1 DIRECT BOX Affordable and versatile.

Features 1/4" Hi-Z in put and loop-through out put, a Lo-Z

out put and a ground-lift switch. Packaged in a durable

16-gauge steel box.

ITEM DESCRIPTION PRICE

CB1 �� Passive direct box �� 54�73

PRO CO DB-2 STEREO DIRECT BOX This low-noise direct

box has a high dynamic range and features two 1/4" inputs

with parallel 1/4" outputs, a -30dB pad for each input, and 2

XLRM balanced outputs with a ground lift switch. Suitable for

any high impedance instrument, it uses two DBT-1 transform-

ers and MU metal cans for optimal RF/EMF rejection. When

using a single input, this direct box will act as a transformer-

isolated split that provides 2 balanced outputs from a single in.

ITEM DESCRIPTION PRICE

DB-2�� Stereo direct box ��176�85

PRO CO INTERFACE BOXES DB-1 DIRECT BOX

1/4" phone jack input, 1/4" phone jack par al lel output. SPKR/

INST switch (-20dB pad). FIL TER/FLAT switch (six dB/octave

low pass), XLRM isolated output with GND/LIFT switch.

ITEM DESCRIPTION PRICE

DB1 �� Passive direct box �� 90�63

PRO CO IGATE AUDIO GATEWAY This rackmountable universal audio interface

takes high impedance headphone or line level signals from MP3 players, mono or

stereo unbalanced line inputs, and instrument inputs and converts them into low

impedance balanced mic signals that are ready for use with your mixing console.

ITEM DESCRIPTION PRICE

IGATE ��Line level to balanced mic signal rackmount audio interface, 1RU �� 273�74

Radial Engineering J33 Manual de usuario Pagina 4

Comentarios a estos manuales